Consult your building department for local code requirements. Check with utility companies to locate
underground pipes, lines, cables, etc.

1. Dig post hole.
2. Insert appropriate post into hole (Figure 1).

3. Slide the fence-section rails into the pre-punched post (Figure 2).
4. Fill post-hole with concrete.
5. Secure with enclosed screws.
6. Plumb and level the posts and pickets while the concrete is setting. Brace the post as necessary while concrete sets.
7. Hang gate(s) to appropriate gate post(s).
8. Attach any gate or post hardware and/or fence accessories.